XINXING construction ground protection mats help contractors create temporary access roads, equipment routes, work platforms and staging areas over mud, grass, sand, snow and other soft or sensitive surfaces.
By separating construction traffic from the underlying ground, a correctly selected matting system can help reduce rutting, soil compaction, vehicle sinking and surface restoration work. Connected panels also provide a more consistent travel surface for trucks, excavators, cranes, forklifts and service vehicles.
Create temporary roads without permanent ground modification.
Maintain access through wet, muddy or unstable areas.
Protect grass, prepared soil, paving, asphalt and other existing surfaces.
Build equipment platforms, material storage zones and temporary site compounds.
Clean, relocate and reuse the matting system as construction progresses.
Construction projects place different demands on a temporary access system. The required mat type, panel size, thickness, surface pattern and connector arrangement should be selected according to the equipment, traffic and supporting ground.
| Construction application | How the matting system helps |
|---|---|
| Site entrances and haul routes | Creates a defined route for delivery trucks, excavators, loaders and other construction equipment. |
| Equipment working platforms | Provides broad ground coverage for machinery positioning, maintenance and repeated site operations. |
| Material staging areas | Separates tools, equipment and construction materials from mud, loose soil and standing water. |
| Temporary parking and site compounds | Creates temporary parking surfaces for service vehicles, office cabins and construction trailers. |
| Utility and excavation access | Helps equipment reach trenches, pipelines, drainage works and remote sections of a project. |
| Crane and concrete pump setup | Provides equipment access, while correctly sized outrigger pads support concentrated stabilizer loads. |
| Pedestrian routes | Creates defined walkways across wet or disturbed ground when a suitable pedestrian surface is selected. |
XINXING supplies portable panels, large-format construction road mats, connected heavy-duty platforms and outrigger support products. This allows the temporary access system to be matched to the project instead of relying on one mat design for every site.
| Product series | Recommended construction use | Product information |
|---|---|---|
| QuickMats | Portable access routes, pedestrian paths and surface protection where smaller panels and rapid repositioning are preferred. | View QuickMats |
| DuraMats | Heavy construction traffic, equipment access routes and broad working platforms requiring rigid composite panels. | View DuraMats |
| BaseMats | Long temporary roads, logistics routes and large staging areas where wide panels can reduce the number of joints. | View BaseMats |
| AmphiMats | Connected heavy-duty roadways and work platforms for demanding soft-ground and industrial construction projects. | View AmphiMats |
| Crane Outrigger Pads | Load distribution beneath crane, concrete pump, aerial platform and other equipment stabilizers. | View Outrigger Pads |
For the complete product range, visit our ground protection mats page.
Polymer construction mats do not rot or splinter like timber. They can be cleaned, inspected and relocated when access routes or working areas change during the project.
Available surface patterns are designed to improve tyre or track contact on wet, muddy, sandy and snow-covered ground. The pattern should be selected for the intended vehicle and pedestrian traffic.
Two-way, four-way, overlapping or project-specific connectors can be used with selected mat series. Proper connections help control panel separation and movement under traffic.
Ground mats spread equipment loads over a wider area and separate vehicle tyres or tracks from the surface. This can help reduce deep ruts, disturbed turf and post-project restoration work.
The non-absorbent polymer surface can be washed after use. Correct cleaning, flat storage and regular inspection help prepare the mats for deployment on future projects.
Equipment weight alone is not enough to select a safe matting system. Provide the following project information so that the panel structure and installation layout can be evaluated together.
Equipment type, model and maximum operating weight.
Axle load, wheel configuration, tyre size or track type when available.
Ground condition, including mud, grass, sand, snow, prepared soil, paving or concrete.
Available soil bearing information, site photographs and drainage conditions.
Traffic frequency and whether vehicles will brake, turn or operate repeatedly in one area.
Required road length, road width, turning area and working platform dimensions.
Expected project duration and whether the layout will be relocated during construction.
Available installation equipment, such as forklifts, excavators or cranes.
Safe capacity depends on the complete system, including mat dimensions, thickness, panel design, connection arrangement, vehicle loads and the bearing strength of the underlying ground. Ground protection mats do not replace site-specific ground assessment or engineered ground improvement where the supporting surface is inadequate.
Inspect the route and identify soft areas, drainage channels, underground services and other site hazards.
Remove sharp debris, large stones and objects that could create concentrated pressure beneath the panels.
Position the first panel on the most stable section of the planned route.
Lay additional panels in the direction of travel and align the connector holes or overlapping edges.
Install the specified connectors before opening the route to construction traffic.
Inspect the route after initial vehicle passes and check for movement, settlement or damaged connections.
Repeat inspections after heavy rain, freezing conditions, frequent turning or changes in site traffic.
Clean and inspect the mats before storage or transfer to another construction site.
Engineering plastics manufacturing experience since 1989.
A complete product range covering portable mats, heavy-duty road panels, connected work platforms, outrigger pads and connection accessories.
Manufacturing capabilities including compression moulding, extrusion, CNC machining, cutting, assembly, packaging and warehousing.
Project-based recommendations according to equipment, traffic, ground condition and roadway layout.
Custom dimensions, thicknesses, colours, surface patterns, connector positions and branding for selected product series.
Reusable polymer matting solutions for contractors, distributors and project procurement teams.
The correct series depends on equipment load, ground bearing strength, traffic frequency, turning movements, roadway dimensions and installation resources. QuickMats suit portable access requirements, while DuraMats, BaseMats and AmphiMats address progressively larger or more demanding roadway and platform applications.
Yes, appropriately selected mats can create temporary access over mud, grass, sand, snow and other soft surfaces. Very weak ground, deep voids or severe slopes may require additional preparation or project-specific engineering.
Selected heavy-duty mats can be specified for tracked machinery. The track design, machine weight, turning method and surface pattern must be evaluated because aggressive turning can create concentrated forces and panel movement.
No. Access mats and outrigger pads perform different functions. Ground mats create travel routes or platforms, while outrigger pads distribute concentrated stabilizer reactions. Crane setup should use pads sized for the actual outrigger load and supporting ground.
Custom size, thickness, colour, surface texture, connector arrangement and logo options are available for selected mat series. Final availability depends on the manufacturing method and order requirements.
Please provide the equipment type, maximum operating weight, ground condition, required road or platform dimensions, quantity, project location and destination port. Site photographs and load information will support a more accurate recommendation.
Send XINXING your equipment details, site photographs, ground condition, access route dimensions, required quantity and delivery destination. Our team will help identify a suitable construction ground protection mat series, panel configuration and connection system for your project.
Contact XINXING for a project quotation
XINXING group's construction mats provide an ideal foundation for any construction site, in any climate or environment. These construction mats can provide a stable platform or roadway for the heaviest cranes and construction equipment while providing a fully-connected anti-skid surface for entire work sites.
With a thorough understanding of the industry, we appreciate that time is money and efficiency is everything. That’s why our ground protection solutions are designed to be simple, fast and easy to use.
We'll help you get immediate, safe access to your site, whilst protecting the surface underneath. Our high performance range of heavy and medium duty products enables the quick and efficient construction of temporary car parks, site compounds, trackways and walkways.
XINXING Mats system’ proprietary blend of High Density Polyethylene (HDPE) has specialized fillers for strength, plus UV and anti-static additives to ensure these composite mats will withstand the rigors of heavy construction. Signature construction matting can be easily washed, stored, and shipped to the next construction site for many years of reuse and profitable return on investment.
Eco-friendly in construction site
As you know, there is a lot of dust on the construction work site, Xinxing construction mats system establish not only a safety temporary access roads, but also to to protect the environment, to prevent the dust was blown about by the wind when truck pass.
Protect your Personnel and Equipment
Create temporary access roads to transport equipment over rough ground conditions, and then assemble a stable, weatherproof surface for mobile offices and trailers, equipment storage, and staging for the duration of the project. Move oversized structural loads and accommodate machinery, carts, skids and other specialized moving equipment.
Temporary Roadways
Create temporary roadways to access construction sites with XINXING Systems'matting. A strong Joining system prohibits differential movement between panels, ensuring a strong stable surface for over-sized construction equipment to traverse any ground conditions.
Safe Working Platforms
Create safe and sturdy, fully connected working platforms for construction sites in any climate or soil conditions with XINXING's heavy-duty construction mats. Protect expensive equipment, vehicles, office cabins and trailers from sinking into soft or muddy ground while providing personnel with safe, dry, anti-slip footing.
Environmental Protection
XINXING Systems'construction matting is the economical, ecological, and safe alternative to traditional wooden crane and dragline mats. Signature mats provide anti-slip protection for workers and vehicles while allowing heavy equipment to traverse uneven or soft terrain with minimal damage to the native surface.
Support Crane & Keep Balance
XINXING matched products - Outrigger Pad, a strong pads to support heavy truck and crane in bad ground condition, at the same time to protect the ground no break in pressure of heavy equipment.
Established in 1989,located in Qingdao city of Shandong province, Shandong Ningjin Xinxing Chemical Co.,LTD. is the most professional manufacture of engineering plastics and the only manufacturer who has complete MATS system in China.
Phone
+86 189 0640 6469
Location
Liaohe Road, Ningjin Industrial Zone, Dezhou City, Shandong Province, China.
Copyright © Shandong Ningjin Xinxing Chemical Co., Ltd. All Rights Reserved |
Sitemap
| Powered by 
